[INFORMATION] Pallet tester and box compression tester, pipe compression tester, universal material tester ST-1002 | |
---|---|
Writer : 관리자(salt@light-salt.kr) Date : 23.01.05 Hit : 325 | |
Tags : Pallet tester and box compression tester,pipe compression tester,universal material tester | |
Attachments : | |
Pallet tester and box compression tester, pipe compression tester, universal material tester ST-1002C
Hello, We're Salt Co., Ltd., a material testing machine company. Today's video is an introduction of a large compression tester for pallet, box, pipe and other large materials.
This machine is equipped with devices such as upper and lower limit sensors, remote controllers, pipe deflection meters, pallet airbags, lower pallet sensors, servo motor driving systems,
and averaged results from 4 load cells are fitted.
" ST-1002C Pallet Compression Tester. (Box Compression Tester, Pipe Compression Tester, Large compression tester) All-purpose Material Tester Video Contents "
ST-1002C pallet tester and pipe compression tester, universal material tester
ST-1002C Servo motor-type large pipe compression tester, pallet compression tester, universal material tester - Size : 2700(W) X 2700(H) X 4200(D)mm - Frame Capacity : 200,000N(200kN) - Power : AC380V, 3PHASE 50/60Hz
Pallet airbag, pallet sample, pipe deflection meter
Upper limit and lower limit sensor The upper limit and lower limit sensor is used as safety prevention measures. The limit sensor sets the crosshead to prevent cross header moves higher than the limit.
Remote remote controller
Easy control of pallet and ring stiffness universal material tester and compression tester is possible using remote remote controller.
Pipe deflection meter The pipe deflection meter is fixed to the pillar. You must completely pull back when you don't use to prevent collision/loss.
Servo motor driving system At the top of the frame is the main connection between the motor and the encoder (displacement sensor).
4 load cells average result Four load cells are fixed below the lower axis plate to the power/load sensor. |
|
Prev | ASTM D 2344 Testing fixtures |
Next | ST-300PO How to Use the Abrasive Cutting Machine |
|